-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run Mal Reynolds Pistol - Firefly & Serenity Version (3D Printed Kit)
- Thread starter rgriesbeck
- Start date
Re: Mal Reynolds Pistol (3D Printed Kit)
3 kits done, starting on the 4th. Hope to have all purchased kits shipped by next Friday.
3 kits done, starting on the 4th. Hope to have all purchased kits shipped by next Friday.
Re: Mal Reynolds Pistol (3D Printed Kit)
7 kits going out tomorrow to: sean, A Rabid Wombat, GCarnevale, Kingmob, Alric, lharles, and darkev2
7 kits going out tomorrow to: sean, A Rabid Wombat, GCarnevale, Kingmob, Alric, lharles, and darkev2
Last edited by a moderator:
GCarnevale
Active Member
Re: Mal Reynolds Pistol (3D Printed Kit)
Got mine in the mail this morning, can't wait to take it home and start the process of putting together.
Thanks rgriesbeck!
Got mine in the mail this morning, can't wait to take it home and start the process of putting together.
Thanks rgriesbeck!
Last edited by a moderator:
A Rabid Wombat
New Member
Re: Mal Reynolds Pistol (3D Printed Kit)
Got mine. Looks great!
Sent from my DROID2 using Tapatalk 2
Got mine. Looks great!
Sent from my DROID2 using Tapatalk 2
Re: Mal Reynolds Pistol (3D Printed Kit)
Got it thanks! Will ship wednesday!
PP sent and details via PN!
Many thanks in advance
Got it thanks! Will ship wednesday!
Re: Mal Reynolds Pistol (3D Printed Kit)
Glad people are starting to get the kits! I'll post up an assembly guide in the next day or two...
Glad people are starting to get the kits! I'll post up an assembly guide in the next day or two...
darkev2
Well-Known Member
Re: Mal Reynolds Pistol (3D Printed Kit)
Hello rgriesbeck
Got mine in the mail this afternoon !!!! It looks SOOOOOOOOOOOOOOOO Nice!!! Can't wait to see the assembly guide!!!!
Thanks Again!!!
darkev2
Hello rgriesbeck
Got mine in the mail this afternoon
!!!! It looks SOOOOOOOOOOOOOOOO Nice!!! Can't wait to see the assembly guide!!!!Thanks Again!!!
darkev2
Re: Mal Reynolds Pistol (3D Printed Kit)
Assembly Guide:
This is a pretty easy one to do, but remember sand, sand then sand some more. I usually start at 80, then 150 then 220 grit. Crazy or super glue is all you'll need to stick it all together.
1) After sanding, clean out the areas where to trigger and hammer fit.
2) Then what I did is using the spare piece of filament, cut 2 pieces that will go through one side of the gun through the trigger and into the other side. Do the same for the hammer, you may have to drill out the holes if they're a bit small. Once everything fits, glue the inner sides of the body and clamp it together. Don't glue to close to the trigger or hammer or you'll glue them in place.
3) That's really the biggest part. now just start assembling the pieces onto the body. Pick and choose which side pieces you want to make either the movie or TV gun
4) Assemble the 2 pieces that hold the clip in place, then glue it onto the body.
5) The barrel is a real tight fit, Sand and/or cut bits away until it slides into place, then glue.
6) Now it's just simply just gluing the rest of the pieces on, then using some filler to fill the seams. Then sand and paint.
Assembly Guide:
This is a pretty easy one to do, but remember sand, sand then sand some more. I usually start at 80, then 150 then 220 grit. Crazy or super glue is all you'll need to stick it all together.
1) After sanding, clean out the areas where to trigger and hammer fit.
2) Then what I did is using the spare piece of filament, cut 2 pieces that will go through one side of the gun through the trigger and into the other side. Do the same for the hammer, you may have to drill out the holes if they're a bit small. Once everything fits, glue the inner sides of the body and clamp it together. Don't glue to close to the trigger or hammer or you'll glue them in place.
3) That's really the biggest part. now just start assembling the pieces onto the body. Pick and choose which side pieces you want to make either the movie or TV gun
4) Assemble the 2 pieces that hold the clip in place, then glue it onto the body.
5) The barrel is a real tight fit, Sand and/or cut bits away until it slides into place, then glue.
6) Now it's just simply just gluing the rest of the pieces on, then using some filler to fill the seams. Then sand and paint.
Re: Mal Reynolds Pistol (3D Printed Kit)
Just got mine. Technically arrived yesterday, but missed the post man.
I didn't notice the wood grain in the handle until I looked at the real thing. Can't wait to build it.
I'm thinking of trying to get the insides of a toy gun so I can make the trigger and hammer work.
Just got mine. Technically arrived yesterday, but missed the post man.
I didn't notice the wood grain in the handle until I looked at the real thing. Can't wait to build it.
I'm thinking of trying to get the insides of a toy gun so I can make the trigger and hammer work.
Re: Mal Reynolds Pistol (3D Printed Kit)
Awesome that they're getting delivered. Thanks for the positive feedback, its always appreciated.
Awesome that they're getting delivered. Thanks for the positive feedback, its always appreciated.
firespiter
New Member
Re: Mal Reynolds Pistol (3D Printed Kit)
You can modify the ABS kits pretty easily if you have a dremel tool and some craft wood plus super glue. I modified Rob's Hellboy gun (comic version) to a single action by adding a couple of springs and cutting/sanding some craft wood to mimic a gun's internals, and saturated the wooden extensions with super glue for hardness.
You can see a pic here:
http://www.therpf.com/attachment.php?attachmentid=344996&d=1404393297
The hardest thing, I think is figuring out a spring configuration that will work for you. With the Mal Reynold's gun, it looks like there is a ton of space you could hollow out to orient the action and attach springs. My mod was free because I had all of the stuff in scrap craft bits. But you might need to check an RC hobby shop and look for some springs.
You can modify the ABS kits pretty easily if you have a dremel tool and some craft wood plus super glue. I modified Rob's Hellboy gun (comic version) to a single action by adding a couple of springs and cutting/sanding some craft wood to mimic a gun's internals, and saturated the wooden extensions with super glue for hardness.
You can see a pic here:
http://www.therpf.com/attachment.php?attachmentid=344996&d=1404393297
The hardest thing, I think is figuring out a spring configuration that will work for you. With the Mal Reynold's gun, it looks like there is a ton of space you could hollow out to orient the action and attach springs. My mod was free because I had all of the stuff in scrap craft bits. But you might need to check an RC hobby shop and look for some springs.
Similar threads
