I'm also interested in motorized - Nice job!
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Done / Completed Luke / Vader ANH shared stunt saber kit
Nerdywan01
New Member
Im in 100% for a non motorized
100% down for a motorized stunt if that goes forward!
Alright, Interest is closed now.
Thank you to all those that signed up, i really appreciate it!
those that signed up early saw that I was expecting 10 people and hoping for 20, thinking there wasn't much interest for those and I just wanted to see if a few more people wanted those as I was doing a couple for customers, I'm both slightly overwhelmed by all the work I have to do these days and very gratefull for you guys! thank you very much for your trust and interest in my work, i'm so gratefull for my customers, thank you!
I'll now be ordering all the aluminium tubes and stainless steel 8mm rods.
The white switches and motors are already ordered
I'm still busy on the Barbican finished sabers and will try to get started on those in the next couple weeks
cheers all!
Thank you to all those that signed up, i really appreciate it!
those that signed up early saw that I was expecting 10 people and hoping for 20, thinking there wasn't much interest for those and I just wanted to see if a few more people wanted those as I was doing a couple for customers, I'm both slightly overwhelmed by all the work I have to do these days and very gratefull for you guys! thank you very much for your trust and interest in my work, i'm so gratefull for my customers, thank you!
I'll now be ordering all the aluminium tubes and stainless steel 8mm rods.
The white switches and motors are already ordered
I'm still busy on the Barbican finished sabers and will try to get started on those in the next couple weeks
cheers all!
Hey there,
small update
Aluminium is ordered for the run.
I have received the new UNEF 5/8" tap today and tried a new hole for the red button, it works very well now.
I get the exact result I wanted, which is the red button only threads a little bit and rests against the inner core. That gives the exact look of the original.
as you can see, the core is inside and the red button rests on top of it.
threading a tube gives weird results, but anyways, it seems to work very well.
I have some more investigating to do though as the glass eyes I have on hand are not threading all the way for some reason. Either as a result of the fact we are trying to thread them into a tube, or because UNEF 5/8" is still not the proper size?
weirdly enough, the red buttons I have measure 15.6mm at the threads and the glass eyes measure 15.8mm. I don't know, it's surprising, but I'll make it work.
also received this boat antenna today and will play around with doing a blade for my motorized prototype
cheers all!
small update
Aluminium is ordered for the run.
I have received the new UNEF 5/8" tap today and tried a new hole for the red button, it works very well now.
I get the exact result I wanted, which is the red button only threads a little bit and rests against the inner core. That gives the exact look of the original.
as you can see, the core is inside and the red button rests on top of it.
threading a tube gives weird results, but anyways, it seems to work very well.
I have some more investigating to do though as the glass eyes I have on hand are not threading all the way for some reason. Either as a result of the fact we are trying to thread them into a tube, or because UNEF 5/8" is still not the proper size?
weirdly enough, the red buttons I have measure 15.6mm at the threads and the glass eyes measure 15.8mm. I don't know, it's surprising, but I'll make it work.
also received this boat antenna today and will play around with doing a blade for my motorized prototype
cheers all!
Hey there,
small update
Aluminium is ordered for the run.
I have received the new UNEF 5/8" tap today and tried a new hole for the red button, it works very well now.
View attachment 1791892
I get the exact result I wanted, which is the red button only threads a little bit and rests against the inner core. That gives the exact look of the original.
View attachment 1791893
as you can see, the core is inside and the red button rests on top of it.
View attachment 1791894
View attachment 1791895
threading a tube gives weird results, but anyways, it seems to work very well.
View attachment 1791896
I have some more investigating to do though as the glass eyes I have on hand are not threading all the way for some reason. Either as a result of the fact we are trying to thread them into a tube, or because UNEF 5/8" is still not the proper size?
weirdly enough, the red buttons I have measure 15.6mm at the threads and the glass eyes measure 15.8mm. I don't know, it's surprising, but I'll make it work.
also received this boat antenna today and will play around with doing a blade for my motorized prototype
View attachment 1791897
cheers all!
Also…if you decide to offer versions with working energy blades, powered by a Kyber crystal, I will upgrade my order to that version, as well.
Hey there,
quick update on this project, aluminium and stainless steel arrived today
I'm still pretty busy with the Barbican run and other smaller things right now, so I'll probably not start on this before 1st of March.
I'll post another update when I'm ready to start.
cheers
quick update on this project, aluminium and stainless steel arrived today
I'm still pretty busy with the Barbican run and other smaller things right now, so I'll probably not start on this before 1st of March.
I'll post another update when I'm ready to start.
cheers
Last edited:
Sa1yan5pirit
Active Member
I'm also late to the party. If there's a spare one, I'd also like to take one.
I’m switched on!
Hi Tsuyoshi,
Sorry, i'm very busy and didn't anticipate that project would be this big, so I needed to change my planning a bit.
I'm collecting all the material necessary for the project and almost ready to start on it, but haven't started yet.
I should be able to start slowly next week and be done in the second half of April or something. I don't want to give a clear deadline as I'm having a hard time finishing everything I have to do on time right now.
But it's the next thing on the planning and I will start posting updates as soon as possible, thank you for your patience.
cheers
Similar threads
