Nils
Sr Member
I got those from a guy in the US. Don't remember his name right now.
Here are some samples:
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Graflex 2.0 and Crossguard saber run - sign up thread
Here are some samples:
Has anyone found a blade plug for the Graflex 2.0 that is somewhat similar to the original bulb plog?
Skigoddard
New Member
Right here
They're sold out at the moment, but I emailed the shop owner who said there would be another batch sometime in the next few weeks.
danielpeeters
New Member
To those who have these Graflex's, are the grips made out of rubber or are they a hard plastic? I own a Parks MPP and had to change the grips to screen accurate hard plastic because Jeff supplied rubber grips which aren't correct.
Hard plastic! (Nice and sturdy for the screws for the esb/TFA grips!) and they are also curved to fit into the saber! To say the adhesive they have on them is strong is to put it mildly, so just take your time lining them up and make sure you have it set up for the right amount of grips/holes you want!
danielpeeters
New Member
That's fantastic to hear!
Skigoddard
New Member
Hard plastic!
Last edited:
trowa195
Active Member
I am planning on making my own using a cheap graflex flash found on ebay. You should just be able to gut one and at least use the pin out of it. We will see if it works when I get the saber and the flash. I will post pics if it works.
Got mine today. Super easy to put together, but it took me a while to figure out that the bottom half has to screw out.
I'm planing to replace the card with a gold one when I get the chance and I'll be getting Yoda's crystal chassis when he releases them.
It's my fist saber and I can't be happier with it.
I'm planing to replace the card with a gold one when I get the chance and I'll be getting Yoda's crystal chassis when he releases them.
It's my fist saber and I can't be happier with it.
Sith4Life
Well-Known Member
any issues with your red button?
- - - Updated - - -
Nice call all got mine today makes a big Diff? Thanks for the advice!
update, 200 units shipped from China yesterday, using 3 day DHL, so early next week, all who've paid from dec 25 to jan 9-10 (approx) will get their units mailed out...those paying after Jan 10 and even now, will get them approx Feb 10th-15th time frame....still have over 60 slots left in this possibly last batch....
korbanth47@gmail.com
korbanth47@gmail.com
Just had to file down the edges of the boards for the button, then I used some white-tac to stick the red caps temporarily in place.
I'm going to make them more permanent when I get around to doing the electronics.
Sith4Life
Well-Known Member
Can this plug be used alone for a power up? Or do we need another underneath?
DeathlyTaco
New Member
I'm in if there's still slots
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
AgentOfShield
Well-Known Member
I believe just the ESB version has the metallic tape on the clamp.
