Limited Run Aliens Pulse Rifle Parts (Shrouds, Vents, Stocks, Grips, ect.)

[eethan]

This is all super nice People looking to build a Pulse rifle are very lucky that you took this over and someone other that Matsuo is finally offering parts. Better than his on top of this. Very cool!
cheers

 

[CoCost]

WOW!! Absolutely amazing work mate

I've sent you a message about procuring a few of your available parts, but would also be VERY keen on registering my interest in one of these shroud sets. Would be a stellar replacement for my current build (based around an old, heavily modified, G&P kit).

Also, curious to know if you have any plans on recreating/reproducing the Spas12 heat-shield at some point down the line? Sourcing one in the UK has proven, well difficult.

 

[dr_slurpee]

Thanks for the compliments everyone!

First post updated, our 2 prototype GL blocks are discounted to GBP£39.00 each

 

[eethan]

I received my stock today and it is an awesome upgrade! it fits well on my airsoft thompson as well.

it's a bit silly because I don't have a lot of money to spend so I have bought only this as it was what I wanted to replace the most, but now that it's here, the front barrel vent looks very out of place and skinny next to it. dr_slurpee when you can, I'll also take a front barrel vent now, thank you!
I end up paying more than necessary in shipping and taxes because I wanted to save the first time but that's life!
cheers

 

[prev]

Interested in a set of shrouds please sir.

 

[userd1402]

-.-

 

[dr_slurpee]

Lists updated in the first post. All of the 10 shrouds are currently spoken for but I have added an overflow waitlist.

Also added shipping cost for shrouds once they are ready!

Would love to see some pics of the parts people have already received on your Pulse Rifles!

 

[CoCost]

Soz for the crappy pictures as they really dont do it justice

The grip fits like a dream, is solid AF, and looks absolutely gorgeous!!!! Thanks again mate

 

[dr_slurpee]

Love the pics CoHost!

Slings are being worked on also, here is a photo of the components for them!

 

[dr_slurpee]

The shrouds will have trim guides that will help people get close to fitment then they can finesse things as needed. Here are some pics showing a shroud trimmed just to the guides and how it fits on a replica SPAS cage. The guides get you close without having to guess and then you can fine tune it as needed. Also the "horn" in front of the GL trigger is made longer so it goes up tight to the SPAS cage so you can go with an idealized look or trim it back with the gaps that many of the hero shrouds had.

 

[DarthWilder]

Here are some pics showing a shroud trimmed just to the guides and how it fits on a replica SPAS cage.

Ha, please tell us more about the replica SPAS cage!

 

[dr_slurpee]

Another piece being worked on to offer in aluminum, the "mag tab".

 

[FokkerVF]

I have been working with a friend to create a number of high quality Pulse Rifle parts. They are a combination of known research and our own in order to dial in the parts. These will be limited run and no payments taken until the parts are in hand and ready to be packed and shipped.

Contact me to check on shipping, buy, or be added to the interest list.

Available Now!

Thompson Grip
View attachment 1759672View attachment 1759673
GBP£37.50 each plus actual postage from UK. Tracked shipping to the US GBP£16.00 (combined shipping would be quoted separately)

• Made to fit the WE-Tech Cybergun GBB M1A1 Thompson. (may fit others but unknown)
• Original model master incorporating a blend of the features of all the PR grips.
• Cast in high quality, impact resistant, black urethane resin.
• Base screw plug cast off a real Thompson grip screw.

10 Available:

1. Jim - PAID and SHIPPED
2. Alien War Doug - PAID and SHIPPED
3. CoCost - PAID and SHIPPED
4. Available
5. Available
6. Available
7. Available
8. Available
9. Available
10. Available

Grenade Launcher Blocks (Prototypes)
These prototypes were made using older information that was available, minor changes were made to the final versions. Added side by side photos for comparison.
View attachment 1759684View attachment 1759685View attachment 1759939View attachment 1759940
GBP£39.00 each plus actual postage from UK. Tracked shipping to the US GBP£16.00 (combined shipping would be quoted separately)

• Created based on photos/research from the original parts, information from "BugStomper"/Pulserifle.net, and known measurements.
• Solid machined aluminum, cut from aircraft alloy billet, bead blasted finish.
• 8 Hole version is 70mm tall, 37mm wide, 25.5mm thick, shotgun barrel hole is 24mm dia., the mag tube cavity in the back is 25mm dia.
• 10 Hole version is 70mm tall, 37mm wide, 13mm thick, shotgun barrel hole is 24mm dia., the mag tube cavity in the back is 25mm dia.
• Holes for grub screw 2.5mm dia, ready to tap for M3 (or you can drill larger for a different size)

1 of each Available:

1. 8 Hole - PAID and SHIPPED
2. 10 Hole - PAID and SHIPPED

Grenade Launcher Blocks
Updated with minor changes from our prototypes
View attachment 1760463View attachment 1760464View attachment 1760465View attachment 1760466View attachment 1760467

GBP£49.00 each plus actual postage from UK. Tracked shipping to the US GBP£16.00 (combined shipping would be quoted separately)

• Created based on photos/research from the original parts, information from "BugStomper"/Pulserifle.net, and known measurements.
• Solid machined aluminum, cut from aircraft alloy billet, bead blasted finish.
• 8 Hole version is 72mm tall, 38mm wide, 25.5mm thick, shotgun barrel hole is 25mm dia., the mag tube cavity in the back is 26.5mm dia.
• 10 Hole version is 72mm tall, 38mm wide, 13.5mm thick, shotgun barrel hole is 25mm dia., the mag tube cavity in the back is 26.5mm dia.
• Holes for grub screw 2.5mm dia, ready to tap for M3 (or you can drill larger for a different size)

10 of each Available:

1. 8 Hole - Jim - PAID and SHIPPED
2. 8 Hole - DarthWilder - PAID and SHIPPED
3. 8 Hole - Harry Harris - PAID and SHIPPED
4. 8 Hole - Alien War Doug - PAID and SHIPPED
5. 8 Hole - barney five - PAID
6. 8 Hole - Available
7. 8 Hole - Available
8. 8 Hole - Available
9. 8 Hole - Available
10. 8 Hole - Available
11. 10 Hole - DarthWilder - PAID and SHIPPED
12. 10 Hole - Moosh89 - PAID and SHIPPED
13. 10 Hole - barney five - PAID
14. 10 Hole - Available
15. 10 Hole - Available
16. 10 Hole - Available
17. 10 Hole - Available
18. 10 Hole - Available
19. 10 Hole - Available
20. 10 Hole - Available

Barrel Vent
View attachment 1759932View attachment 1759933

GBP£94.00 each plus actual postage from UK. Tracked shipping to the US GBP£20.00 (combined shipping would be quoted separately)

• Created based on information from "BugStomper"/Pulserifle.net
• Made from accurate 40mm square mild steel tube with 3mm wall
  • Matching material and specs based on first hand research at Bapty
• Inner Diameter of the barrel ring is 19mm
• Milled and welded professionally

10 of each Available:

1. 8 Hole - Jim - PAID and SHIPPED
2. 8 Hole - DarthWilder - PAID and SHIPPED
3. 8 Hole - Harry Harris - PAID and SHIPPED
4. 8 Hole - Alien War Doug - PAID and SHIPPED
5. 8 Hole - barney five - PAID
6. 8 Hole - Available
7. 8 Hole - Available
8. 8 Hole - Available
9. 8 Hole - Available
10. 8 Hole - Available
11. 10 Hole - DarthWilder - PAID and SHIPPED
12. 10 Hole - Moosh89 - PAID and SHIPPED
13. 10 Hole - eethan - PAID and SHIPPED
14. 10 Hole - barney five - PAID
15. 10 Hole - Available
16. 10 Hole - Available
17. 10 Hole - Available
18. 10 Hole - Available
19. 10 Hole - Available
20. 10 Hole - Available

Shoulder Stocks
View attachment 1759930View attachment 1759931

GBP£94.00 each plus actual postage from UK. Tracked shipping to the US GBP£23.00 (combined shipping would be quoted separately)

• Created based on information from "BugStomper"/Pulserifle.net
• Made from accurate 40mm square mild steel tube with 3mm wall
  • Matching material and specs based on first hand research at Bapty
• Milled and welded professionally

10 of each Available:

1. 8 Hole - Jim - PAID and SHIPPED
2. 8 Hole - DarthWilder - PAID and SHIPPED
3. 8 Hole - Harry Harris - PAID and SHIPPED
4. 8 Hole - Alien War Doug - PAID and SHIPPED
5. 8 Hole - barney five - PAID
6. 8 Hole - Available
7. 8 Hole - Available
8. 8 Hole - Available
9. 8 Hole - Available
10. 8 Hole - Available
11. 10 Hole - eethan - PAID and SHIPPED
12. 10 Hole - DarthWilder - PAID and SHIPPED
13. 10 Hole - Moosh89 - PAID and SHIPPED
14. 10 Hole - barney five - PAID
15. 10 Hole - Available
16. 10 Hole - Available
17. 10 Hole - Available
18. 10 Hole - Available
19. 10 Hole - Available
20. 10 Hole - Available

Coming Soon!
If you would like to be added to the interest list for any of these I will create a list and those people will have first opportunity to buy when available.

Shrouds
Production sample, only lightly buffed, more buffing will give an even brighter look.
View attachment 1760858
GBP375.00 per set plus actual postage from UK. Tracked shipping to the US GBP£29.00 (combined shipping would be quoted separately)
These will be sold/shipped as they are completed/ready based on the order of the interest list, no money taken before hand.

• Based on photos of aluminum hero shrouds and first hand research at Bapty (cleaned up to be made straight and symmetrical)
• High quality professionally made aluminum-filled, fiberglass shrouds, and mag butt caps.
• Uniform thickness around 3mm, STRONG, light weight.
• Comes untrimmed, with trim lines molded in for tight fit to a Thompson and SPAS cage allowing for individual adjustment for fit.
• Open access at the top, between the upper 'handles' (track along the top) for you to fit as strong and light a U-channel as fits your build. This allowed us to keep the thickness uniform, reduce cost and weight.

10 sets will be available

1. Jim
2. JLinNY
3. DarthWilder
4. Harry Harris
5. mugatu
6. Moosh89
7. Space Jockey
8. CoCost
9. prev
10. abaddon
11. Waitlist - userd1402
12. Waitlist - Cpl Potter
13. Waitlist - barney five

Slings
Photo of the components being used for the slings.
View attachment 1763408

• Screen accurate 8-band webbing
• genuine period hardware.

10 will be available

1. Jim
2. DarthWilder
3. mugatu
4. Available
5. Available
6. Available
7. Available
8. Available
9. Available
10. Available

I realize I'm very late to the party, and I see there's a wait list, but if you could please add me to the queue for a set of shrouds I would be eternally grateful. Also, I'd like to buy a 10-hole barrel shroud, as well. Thank you!

 

[dr_slurpee]

FokkerVF added you to the shroud list, sent you a PM.

Just added the cost for the Slings to the first post, GBP£37.50 per set plus actual postage from UK.

 

[dr_slurpee]

Another teaser. Parts are just set together with one side of the shroud over it, but it gives you the idea!

 

[ObscureReferenc]

Could I get a 10 hole barrel vent, 1x 10 hole and 1x 8 hole shotgun block and added to the shroud waitlist?

 

[krithargus]

The shrouds will have trim guides that will help people get close to fitment then they can finesse things as needed. Here are some pics showing a shroud trimmed just to the guides and how it fits on a replica SPAS cage. The guides get you close without having to guess and then you can fine tune it as needed. Also the "horn" in front of the GL trigger is made longer so it goes up tight to the SPAS cage so you can go with an idealized look or trim it back with the gaps that many of the hero shrouds had.

View attachment 1764012View attachment 1764011

I stated I wanted one on Facebook...a bit obsessively, Am I still in over flow? F.Scott McKown

 

[dr_slurpee]

I stated I wanted one on Facebook...a bit obsessively, Am I still in over flow? F.Scott McKown

On Facebook? I can certainly add you to the overflow for the shrouds.

 

[dr_slurpee]

First batch of shrouds are ready to go out so I will be reaching out to the first people in the list.

 

[mugatu]

Paid today for the shrouds..Thank you!