The Definitive Marvel's Daredevil thread

[tibberon25]

My Dune ones arrived today. I've never owned a pair of G-Star before but these are definitely quality pants. I may need to get the waist altered before I do anything else, but wanted to say thanks - the DressCode website shipped it fast (2 days).



Is that the 8840? I'm surprised that it has the McDavid logo on the front - in the pictures the logo has always been on the arm...

Yup. Here's the box that it came in

Also the logo came off easily with a little nail polish remover.


Sent from my iPhone using Tapatalk

 

[Crank729]

Just found out Blender's exported OBJs retain their coloring

Almost done with this very tedious unfold. The countersunk holes for the hex nuts have been omitted from the print pages; rather than engage in that kind of lunacy, I think it'd be much easier (with less risk of warping) to just drill those out after the piece has been hardened.

I think I'll be done before the end of the day!

Looks great! I'd love to take a stab at this once it's finished!

 

[RoboTrap]

Aaaaaaaand done!

Now to tackle the scaler version since this thing is way too difficult to put together, only to find that it won't fit you >.<

 

[IndridColdx]

Aaaaaaaand done!

http://i.imgur.com/frcGsZw.jpg

Now to tackle the scaler version since this thing is way too difficult to put together, only to find that it won't fit you >.<

Very nice. Will this be free or you will be selling it?

 

[WebHeadedHero]

Hey guys! I asked this earlier but I didn't get a reply. Has anyone come up with a pattern to cut for the cloth mask? I'd prefer not to use the leggings method.

 

[IndridColdx]

Hey guys! I asked this earlier but I didn't get a reply. Has anyone come up with a pattern to cut for the cloth mask? I'd prefer not to use the leggings method.

I'm using a Heattech shirt from Uniqlo, the pattern is very similar

 

[tibberon25]

I'm using a Heattech shirt from Uniqlo, the pattern is very similar

IndridColdx can you post the pattern?


Sent from my iPad using Tapatalk

 

[IndridColdx]

@IndridColdx can you post the pattern?


Sent from my iPad using Tapatalk

it's a bit fluffy because of wear but new, it looks very good

 

[E60flip345]

are you gonna be selling this or is it free? i would really appreciate if it is free

Aaaaaaaand done!

http://i.imgur.com/frcGsZw.jpg

Now to tackle the scaler version since this thing is way too difficult to put together, only to find that it won't fit you >.<

 

[PcFish]

So these guys at ComicWow loved my black mask suit so much they put me in a video. Just went to their studio for a tour and to film some clips. It was so fun.
I'll post the videos when they upload them.

For the shoot, I made some temporary baton holsters. Bought a bunch of straps and clips. After working with these, I have a grasp of how I want to make screen accurate ones. Lots of e9000 glue, and sewing adhesive and an iron. For the screen accurate one, I'll probably do the same techniques.

http://imgur.com/a/ewicy

The baton holsters I used were these. I bought two, partially cut one of them then glued them together. It looks pretty clean, of the holster I cut up, I took the stitching out and re-used the little cloth that wraps around it so it looks like one piece all around.

 

[Westies14]

My Dune ones arrived today. I've never owned a pair of G-Star before but these are definitely quality pants. I may need to get the waist altered before I do anything else, but wanted to say thanks - the DressCode website shipped it fast (2 days).

Glad I could help! Mine "dune" ones should arrive today; I'll post a picture along with the Arsenic green pair. Out of curiosity, what size would be ideal for you?

 

[WebHeadedHero]

I was speaking more along the lines of how to cut the material rather than the material itself

 

[tibberon25]

I was speaking more along the lines of how to cut the material rather than the material itself

What he said. Also besides the one posted, are there any other tutorials on how to cut the leggings?


Sent from my iPad using Tapatalk

 

[TAlcareru]

Finally got my 8800R sent to me, how did you guys remove the logo?

Just another plug for PunisherNC's method back on page 19. Acetone from Home Depot and a dishrag took it off very easily, with no harm to the fabric. This definitely works.

 

[tibberon25]

Just another plug for PunisherNC's method back on page 19. Acetone from Home Depot and a dishrag took it off very easily, with no harm to the fabric. This definitely works.

It does.


Sent from my iPad using Tapatalk

 

[RoboTrap]

Cowl and simplified scaler version fully done. I know some people were hoping to get these files for free, but the same bills that stopped me from doing a 3D print are necessitating I sell my helmet files. Sorry, guys

 

[IndridColdx]

Here's my progress. Not screen accurate naturally.
Still need to make my holster which I will make by attaching fabric straps with clips to my nunchuk holster.
Mask will be made out of a Heattech shirt, which should arrive any moment.



Where can you obtain straps? Like the ones found on backpacks?

 

[Archer21]

Here's my progress. Not screen accurate naturally.
Still need to make my holster which I will make by attaching fabric straps with clips to my nunchuk holster.
Mask will be made out of a Heattech shirt, which should arrive any moment.

View attachment 477334

Where can you obtain straps? Like the ones found on backpacks?

You mean nylon webbing? Joann's or eBay... that's where I get mine.

 

[RoboTrap]

Started a thread for my helmet files. Feels weird. Real weird. I've sold a lot of digital content, I don't know why this seems different.

 

[IndridColdx]

You mean nylon webbing? Joann's or eBay... that's where I get mine.

Sweet i'll try to find some.

Also my holster is in hard vinyl.
What glue should I use to stick vinyl to nylon? Will hotglue do it?