-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Star Wars - Jedi training remote SFX aluminium box base
- Thread starter eethan
- Start date
Thank you for your interest,
So far, I have 3 left to be paid but the interested parties haven't said they won't take them, just need a bit of time to pay them.
If those 3 sell, they will all be sold and I'll consider asking for interest for a second batch if I get 5 or more people on board at 350€ + shipping, I have already 2 people on the waitlist, so it's a possibility.
Cheers
I have found a good solution I think for the scratch built remotes.
it goes on the 7mm rod and can be threaded one turn or so to secure it more.
To install it to the remote, you drill a 3/8 hole in your sphere while building it, glue securely the adapter to it and glue the bottom large ring on top of it to hide the large flat lip I machined. The aluminium thin lip around the rod reproduces the tube visible on the original. It should work nicelly and be super accurate. i hope that works for you guys, they will be included for the people building scratch built remotes.
cheers all
it goes on the 7mm rod and can be threaded one turn or so to secure it more.
To install it to the remote, you drill a 3/8 hole in your sphere while building it, glue securely the adapter to it and glue the bottom large ring on top of it to hide the large flat lip I machined. The aluminium thin lip around the rod reproduces the tube visible on the original. It should work nicelly and be super accurate. i hope that works for you guys, they will be included for the people building scratch built remotes.
cheers all
Thank you Danny, much appreciated
I've got a lot of help, they all want to participate
You know how much I love this! LolThank you Danny, much appreciated
I've got a lot of help, they all want to participate
View attachment 1864799
Hello there,
I have sent most of the orders that were paid, I'm holding one for a customer and the last paid one goes out tomorrow. Still two that are unpaid but I have a timeline for payment from the customers, so it seems the 11 props from the first run sold
First of all, thank you all very much for the support guys, and I hope you enjoyed this run and will like your prop when you receive it
I really enjoyed working on this and making a small run of this extremely obscure prop.
Now, I know I have already 3 people interested in a new batch for this, so let's see if we do a second run
Second run would be actual calculated cost during production of the first run, 350€ + shipping
I need at least 6 people on board to make it happen.
I am not in a hurry this time I guess, so I'll leave this new interest period open for 2 weeks. Until October 15th.
please post your interest below if you are sure to buy when they are ready. Production time depends on number of interested people.
cheers all
I have sent most of the orders that were paid, I'm holding one for a customer and the last paid one goes out tomorrow. Still two that are unpaid but I have a timeline for payment from the customers, so it seems the 11 props from the first run sold
First of all, thank you all very much for the support guys, and I hope you enjoyed this run and will like your prop when you receive it
I really enjoyed working on this and making a small run of this extremely obscure prop.
Now, I know I have already 3 people interested in a new batch for this, so let's see if we do a second run
Second run would be actual calculated cost during production of the first run, 350€ + shipping
I need at least 6 people on board to make it happen.
I am not in a hurry this time I guess, so I'll leave this new interest period open for 2 weeks. Until October 15th.
please post your interest below if you are sure to buy when they are ready. Production time depends on number of interested people.
cheers all
mbmcfarland
Sr Member
I missed this the first time because I assumed it was for a "floating" base without ever looking. I am definitely in if you do a second run!
BountyHunter93
New Member
This is Amazing work. I would be interested in one on another run and possibly even two of them!
Thank you very much for your interest
I need firm commitment from people as I will do the exact number requested and am funding the material and my time upfront, so I'll need to know if you are in for 1 or 2, there won't be extras if the second run happen.
I hope we can get 6 people on board, I was expecting a bit more reply as I had already 3 people that told me before they were interested.
Cheers
Ah, that's awesome! Thank you for sharing. So much more colorful with the motor added, looks great
thank you for your interest, looks like we are on a good path to a second run
keep it coming people, this is not happening anymore after this, i'm only making a second batch as i don't like to have people missing out, but I normaly move on to other projects to offer other rare cool stuff
keep it coming people, this is not happening anymore after this, i'm only making a second batch as i don't like to have people missing out, but I normaly move on to other projects to offer other rare cool stuff
Similar threads
- Sale
