Yes, I can do that. I've added you to the waiting list.
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Interest Star Trek TOS Science Scanner Run for 2025 - Waiting List Started
- Thread starter Corellianexports
- Start date
FANATICO
Sr Member
Yes I’m interested…Kindly put me on your
Star Trek TOS Science Scanner Run for 2025 - Waiting List
With sound of course….Qty. 2
Thanks
I've put you on the waiting list.
FANATICO
Sr Member
Whoa…I failed to mention….I’d like qty. 2 with sound but also as buildup kits. I don’t want them already assembled.I've put you on the waiting list.
Thanks!
I won't be able to provide sound cards with kits, but I can direct you to a place where you can get the sound cards when the time comes.
FANATICO
Sr Member
What’s all involved in programming the sound card? Are multiple sounds programmable? I’m assuming you’ll have instructions of shoehorning in the sound card physically once programmed?
Thx
Because of the limited amount of space, I'm using an off the shelf sound card that only plays one sound.
Here's a link to the procedures for building a kit:
Star Trek TOS Dr M'Benga Medical or Daystrom Science Scanner Build
After purchasing one of the Diamond Select Tricorders with science scanner a few years back, I thought it would be fun to try and machine a full-scale scanner. It turns out the Diamond Select version is slightly smaller than the original and it uses a standard RGB (Red/Green/Blue) color...
www.therpf.com
FANATICO
Sr Member
Thanks….I’ve been reading that….but I assume you’ll revise those steps to include adding (with pics?) the soundboard and it’s connections?Here's a link to the procedures for building a kit:
Star Trek TOS Dr M'Benga Medical or Daystrom Science Scanner Build
After purchasing one of the Diamond Select Tricorders with science scanner a few years back, I thought it would be fun to try and machine a full-scale scanner. It turns out the Diamond Select version is slightly smaller than the original and it uses a standard RGB (Red/Green/Blue) color...
Will you also provide a basic schematic of all connections and components as most electronic kits usually have?
Thx
I can probably add my procedures for attaching the sound card to my old build link. More than likely a schematic won't be necessary, but we'll see. My suggestion is that if you're not experienced with electronics, you may want to think about getting a build up instead. I've been doing this for a long time and it takes me several hours to do the electronics with the sound card.
FANATICO
Sr Member
Yeah I’m experienced in electronics…..but besides procedures, schematics remove possible guess work.
Also building the kit will give me an excuse to tidy up my workbench a bit
Last edited:
FANATICO
Sr Member
Speaking of limited space…..the question would arise will the Science Scanner fit in the Wand Tricorder’s lower compartment?
The scanner measurements are 3 1/8 length and 1 1/4 diameter as I understand it…..so YES horizontally, but not vertically.
A person will have to sacrifice not using the Tricorder’s supplied compartment installable/removable dividers.
Using a piece of wooden dowel at the same dimensions…..it’s clear to confirm the Science Scanner will fit.
Last edited:
smithjohnj
Sr Member
If still available I would like a Complete kit with the stated Price of $190 from your 2025 run. I will also be looking to add sound to the unit.
Ok. I've added you to the waiting list.
I'm in for a fully built one with sound if there's room for me!
I've got you on the list.
There are two spots left on the waiting list.
Right now I have a machining start date of 8/1 pending a current project. If I can get that project done early, I will move up the start date.
Right now I have a machining start date of 8/1 pending a current project. If I can get that project done early, I will move up the start date.
Sure thing. Pm sent!
Opus Penguin
Well-Known Member
I got one of these from you and it was well worth the cost. Very well built. Any chance you will do a medical one?
Similar threads
