This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Some of you have been following this project over at our Neverending Story book thread here: Limited Run - The Neverending Story (blank) Book and Auryn by Magnoli Props
...but I wanted to make a new thread specifically for the Auryn medallion as it's been a VERY tricky project due to several factors and I wanted to keep you guys posted and gauge genuine interest to see whether or not we should continue.
This was our previous prototype:
View attachment 1811016
Now, the problem with this one was that no one could do the shiny-gold plus the antique silver plating without being either messy or without sacrificing the dual shiny/antique finish. So, working closely with laellee , we split the one-piece design into four separate pieces, which could then be cast and electroplated separately, then joined back together after plating, ensuring a perfect finish. Now, the good news is... it'll look clean, colors will be spot on... AND it'll be cast in BRASS, not a cheap allow or pot-metal.
So... the question is this: How many of you would be interested in a super-detailed shiny gold and antique silver plated BRASS Auryn, including gold chain seen above, for around $95? Please post your interest here and if there are enough guys signing on, we'll go forward with this project after long last!
Kind regards,
Indy
Magnoli Props
I’d definitely be interested!Some of you have been following this project over at our Neverending Story book thread here: Limited Run - The Neverending Story (blank) Book and Auryn by Magnoli Props
...but I wanted to make a new thread specifically for the Auryn medallion as it's been a VERY tricky project due to several factors and I wanted to keep you guys posted and gauge genuine interest to see whether or not we should continue.
This was our previous prototype:
View attachment 1811016
Now, the problem with this one was that no one could do the shiny-gold plus the antique silver plating without being either messy or without sacrificing the dual shiny/antique finish. So, working closely with laellee , we split the one-piece design into four separate pieces, which could then be cast and electroplated separately, then joined back together after plating, ensuring a perfect finish. Now, the good news is... it'll look clean, colors will be spot on... AND it'll be cast in BRASS, not a cheap allow or pot-metal.
So... the question is this: How many of you would be interested in a super-detailed shiny gold and antique silver plated BRASS Auryn, including gold chain seen above, for around $95? Please post your interest here and if there are enough guys signing on, we'll go forward with this project after long last!
Kind regards,
Indy
Magnoli Props