Spider-man (Raimi) 3D Print Files/Pattern - FREE

What right tool did u use too split the legs an what layer was u on if u don't mind me asking and did u measure ur legs before u do it too make sure its long enough?
iNSPIRATION said:
split the legs in severally parts. fix the crotch and make a selection from the legs (only the blue parts!!) and make it longer.. difficult to descripe everything.
Click to expand...
 
Last edited:
Manny said:
What right tool did u use too split the legs an what layer was u on if u don't mind me asking and did u measure ur legs before u do it too make sure its long enough?
Click to expand...


22222.PNG

long time ago i made a spidey suit which have this problem with the crotch (it was not not tight fitting). so i make the thigh longer on this one. i have no measuerements.. i make it free. on the picture you can see the "belt" is on the same place. the boots have the same measuerents only the thigh is longer.
 
Here's version 10 of the raimi pattern been working on it for a while, this was based off the original file.Used countless pictures and sources to swatch the coloring.

 
Oh so all u did was separate the legs from the crotch an just stretch the legs lol
iNSPIRATION said:
View attachment 457495

long time ago i made a spidey suit which have this problem with the crotch (it was not not tight fitting). so i make the thigh longer on this one. i have no measuerements.. i make it free. on the picture you can see the "belt" is on the same place. the boots have the same measuerents only the thigh is longer.
Click to expand...
 
Manny said:
Hey ken is it possible too remove the mask attached too the suit an leave em separate
Click to expand...

Yes it is possible. But, if I did that than others would want it attached... This is what the layered version is for anyway. If y'all wanna customize your suit in any way, download the layers and have at it...sorry man, don't mean to sound harsh, I just can't do it.

But, on the bright side, there will a new version coming up. Same colors, but I fixed a few minor web issues. One is the finger to palm alignment and the other is a smaller web oval between the eyes.
 
Its all good and tight cant wait too see the new patterns
kenlandrum said:
Yes it is possible. But, if I did that than others would want it attached... This is what the layered version is for anyway. If y'all wanna customize your suit in any way, download the layers and have at it...sorry man, don't mean to sound harsh, I just can't do it.

But, on the bright side, there will a new version coming up. Same colors, but I fixed a few minor web issues. One is the finger to palm alignment and the other is a smaller web oval between the eyes.
Click to expand...
 
kenlandrum said:
Had a few...enjoy!
https://drive.google.com/file/d/0B_sNvgA37t6qOHlwbk5kY25FOEk/edit?usp=sharing

View attachment 369228
Click to expand...

I need your advice! After adjusting the height I sent the symbiot pattern from this post to Zentai Zone for print. What I got back is way way waaaay lighter than what I expected. I know that different monitors can have a different calibration for color, but even after checking mulitple (different model) monitors I still feel like the pattern is way darker than what was printed. This is my first experience with sub dye and zentai so there's a huge knowledge gap. How can I tell what the color will look like once it's printed? I mean I know how to retrieve the CYMK color but if I'm looking at it on my monitor that's not going to help.

Without making any changes to the original file's color this:
9a7cc9becf42126a844f6f0040c40d6c.jpg

Became this:
ec4d693700e90404c718e8b5a954bce0.jpg
11d4fa113d17865edcfad19125819c42.jpg

There are some sizing and other design issues too but I think I know where I went wrong there. meowz0r gave me some advice for adjusting the measurement (though any input I can get I'd love to hear it)!

Also, how can I adjust or do I need to adjust the pattern to have this style fly? The crotch zipper was horrendously obvious (I'll spare you the photos)
article-2591853-1CA72DD000000578-929_634x894.jpg

9a7cc9becf42126a844f6f0040c40d6c.jpg


ec4d693700e90404c718e8b5a954bce0.jpg


11d4fa113d17865edcfad19125819c42.jpg


article-2591853-1CA72DD000000578-929_634x894.jpg
 
Last edited by a moderator:
zentai zone is not as well made as fabric on demand you get less material thickness and you get less color richness...You get what you pay for...That is why half the people selling these spidey outfits are from ZENTAI ZONE be careful of the uzips that can go from one arm pit to the other with no stopper..Sure sign of cheaply made...As for the crotch zipper never get straight up and down i think they had an option for off to the side... if you puff painted your suit the zipper would blend a bit...as for webbing mis alignment you have to get your patterns sewn by someone who cares enough to lign that up...
 
Last edited:
ichidave said:
zentai zone is not as well made as fabric on demand you get less material thickness and you get less color richness...You get what you pay for...That is why half the people selling these spidey outfits are from ZENTAI ZONE be careful of the uzips that can go from one arm pit to the other with no stopper..Sure sign of cheaply made...As for the crotch zipper never get straight up and down i think they had an option for off to the side... if you puff painted your suit the zipper would blend a bit...as for webbing mis alignment you have to get your patterns sewn by someone who cares enough to lign that up...
Click to expand...

I'm definitely seeing that! I was a bit intimidated about sewing with lycra but it rather does look like my next print will be with FOD. I have seen a few folks have had issues with FOD printing darker than what was expected or printing the webbing way wrong. How can I tell what the CYMK color will look like once it's printed? How would I adjust the pattern to allow me to put in a side zipper?
 
You must log in or register to reply here.

Similar threads

Reynology
Spider-Man Face Shell help
Replies
4
Views
333
Reynology
Reynology
G
RPC Spider-Man Help?
Replies
0
Views
199
gemakus
G
C
PS5 Spider-man emblem help
Replies
1
Views
515
thejuy14
thejuy14
dcast
Zombie Ironman helmet - Spiderman Far From Home/What If 3d print project
Replies
4
Views
773
dcast
dcast
EatYourGreenVeg
Trying a cheaper way to achieve raised webbing for Raimi suit
Replies
19
Views
1,727
zhang
Z
Back
Top