Oh i am serious, not sure when it will happen as i need to move house before i do some of the more major projects i have planned, and a gaming chair will be one of them. I used to have a Cobra Bucket seat modified for in fron tof my pc, wish id kept that now hehe would have been a good base.
P2 Re-breather : Pg7 Upgraded 2013 V2.
- Thread starter Usurper
- Start date
Oh i am serious, not sure when it will happen as i need to move house before i do some of the more major projects i have planned, and a gaming chair will be one of them. I used to have a Cobra Bucket seat modified for in fron tof my pc, wish id kept that now hehe would have been a good base.
Oberon1981
Well-Known Member
Haha, then add it to the list of projects. (You never have many on the go right...?)
Yes and no, i try not to have many , but often i dont have funds for one so ill start something else with the materials around me i have.
not working on all these but currentyl i have this stuff STARTED.
Ironman Fettster lid paint up.
Alien suit painting
Alien head sculpt
P1 to be moulded
RB to be moulded
P1 suit needs finishing
Weapon wall peices
several mask paint ups
eerrrrr
oh i have materials here to try making my own dreds also lol, thats all i can think of presently.
not working on all these but currentyl i have this stuff STARTED.
Ironman Fettster lid paint up.
Alien suit painting
Alien head sculpt
P1 to be moulded
RB to be moulded
P1 suit needs finishing
Weapon wall peices
several mask paint ups
eerrrrr
oh i have materials here to try making my own dreds also lol, thats all i can think of presently.
Oberon1981
Well-Known Member
Haha is *that* all, you are slacking ya big lame ass. You've changed man, you've changed...
Oberon1981
Well-Known Member
hang on. . . . . . . . . no i wont, finished night shift 7am, im off surfing in a hr
See, no commitment... Surfing smurfing... (Smurfing? surfing while painted blue?)
Oberon1981
Well-Known Member
dammit my secret is out.
This has gone too far, creating images now and I don't even know what you look like...
So, er, loving the rebreather! Anyone else?
mortenharket
Sr Member
I didnt see this thread Lee, great effort on the rebreather.
Well its moulded.
The outer stone jacket didnt go so well grrrrr, but as id apparently made the silicone jacket very thick it barely needs any support.
Ive cleaned out the mould, and apart from one bubble in the front section ( which is easily redetailed with a knife ) it looks at first glance to be ok.
Ive just poured the resin into the mould, and i guess i just have to wait now to see if the silicone jacket holds its shape well enough without any support.
ill post pics no matter the outcome when ive done 2 pulls later today.
fingers crossed eh
The outer stone jacket didnt go so well grrrrr, but as id apparently made the silicone jacket very thick it barely needs any support.
Ive cleaned out the mould, and apart from one bubble in the front section ( which is easily redetailed with a knife ) it looks at first glance to be ok.
Ive just poured the resin into the mould, and i guess i just have to wait now to see if the silicone jacket holds its shape well enough without any support.
ill post pics no matter the outcome when ive done 2 pulls later today.
fingers crossed eh
Well here we go, im not going to claim perfection in my moulding process as id rather be upfront about it.
Having said that there are only 2 bubbles, one of which is right on the edge underneath which gets sanded off anyway. And 2 where i said i had saw one above.
I have taken a picture of the bubble, then literally 1 minute later after a quick prod with a sharp knife sorts it out.
The mould not having a jacket appears to be a ok solution, as although i think the 1st pull is slightly warped, a quick hover over a boiling kettle softend up the resin to pull it back together. This is going to have to do as to be honest im quite happy with my 1st forray into silicone moulding.
The rebreather its self JUST about fits my P1, i guess i could heat it up and stretch the opening wider, but i am happy for this to just be a display peice.
Final thing, i made the supply tube hole then filled it back in as i wanted to use a coupling i had instead, however i forgot to push it into the clay before i moulded it hehe.
anyway , on with the pictures,
1st bubble, then fixed bubble, then finally The TWINS
hopefully i will get to paint one up in the next week or so.
thanks for looking
Lee.
Having said that there are only 2 bubbles, one of which is right on the edge underneath which gets sanded off anyway. And 2 where i said i had saw one above.
I have taken a picture of the bubble, then literally 1 minute later after a quick prod with a sharp knife sorts it out.
The mould not having a jacket appears to be a ok solution, as although i think the 1st pull is slightly warped, a quick hover over a boiling kettle softend up the resin to pull it back together. This is going to have to do as to be honest im quite happy with my 1st forray into silicone moulding.
The rebreather its self JUST about fits my P1, i guess i could heat it up and stretch the opening wider, but i am happy for this to just be a display peice.
Final thing, i made the supply tube hole then filled it back in as i wanted to use a coupling i had instead, however i forgot to push it into the clay before i moulded it hehe.
anyway , on with the pictures,
1st bubble, then fixed bubble, then finally The TWINS
hopefully i will get to paint one up in the next week or so.
thanks for looking
Lee.
predator666
New Member
Holy **** Lee, that's lethal. Wow, that came out class. Some paint and it'll be dead on replica of the screen used 1.
roninpredator
Sr Member
Great looking piece ! and you say it's your first time with silicone? hard to believe.it seems you've been doing it for years
Oberon1981
Well-Known Member
Looking very good! Which P1 does it fit? I am assuming the closed mouth one?
But yeah great work on that, my bank manager hates you.
But yeah great work on that, my bank manager hates you.
Similar threads
