-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run DL44 TFA Blaster Kit
- Thread starter dmachinist
- Start date
-
- Tags
- star wars
I'm interested in getting that done, too.
kpax
Sr Member
Dave does that to the Denix frames. I'm sure he can do it to the HFC if there were enough people interested.
I think the issue is the holes left after removing the switch.
Filling the holes with Steel fill epoxy putty and securing the screw end would be needed.
The steel filled putty would allow blueing also.
Not sure about the logistics.
Dave can prob figure out if it's practical.
I think the issue is the holes left after removing the switch.
Filling the holes with Steel fill epoxy putty and securing the screw end would be needed.
The steel filled putty would allow blueing also.
Not sure about the logistics.
Dave can prob figure out if it's practical.
Yeah I have no ability or machines to do that kind of work on the metal body, so without outside help, I'm otherwise forced to make the plastic plate solution work. I plan on using a mix of paint and bluing, which I think the original is, but it would still be nice to not have to use plastic and bondo.
There's a run being done of CNC machined side plates to glue onto the side of the M712.
I have non affiliation w/ the person doing this run, just an FYI:
Metal TFA DL-44 Left Side Details Plate[/h]
http://www.therpf.com/showthread.php?t=262445&highlight=tfa
I have non affiliation w/ the person doing this run, just an FYI:
Metal TFA DL-44 Left Side Details Plate[/h]
http://www.therpf.com/showthread.php?t=262445&highlight=tfa
I am making a few more kits now, there is no pre-sale, if you want one you should order it as soon as possible
I was able to find one on airsoft canada forums for $100CAD.
Theres reticle's available online for free and you can print them on transparency paper. Also, this is the TFA kit so it comes with a silver (very nice machined aluminium) scope knob
If you do have a brass scope knob (for an ANH kit) you can use either bluing or paint.
If you do have a brass scope knob (for an ANH kit) you can use either bluing or paint.
DarkAcid
New Member
I have the ANH kit with aluminum scope etc... I pretty much blued everything but didn't know what people are using to darken the brass knob. I'll check out some reticles online. Guess I'll have to play around with size.
Thanks!
Last edited:
There is a pic of the reticle on the ANH page
http://darkenergycreations.com/dl44anhkit.aspx
I didn't see any reticle on the TFA version yet
http://darkenergycreations.com/dl44anhkit.aspx
I didn't see any reticle on the TFA version yet
cboath
Master Member
So the ANH is sold out but there are still spots remaining for TFA? What about the base denix - is it compatible with the TFA kit?
Last edited:
The TFA kit can be modified to fit the denix, but I do not have any denix left right now
Sorry, I do not have any videos on this kit
You can read through the previous pages of this thread, there is a lot of great stuff there by some very talented people
You can read through the previous pages of this thread, there is a lot of great stuff there by some very talented people
Similar threads
