Need to clear some fund for another project, so I'm letting my personal (prototype) copy of my FTL Key replica go. If you want one of these in finished form this is a good opportunity because I'd usually ask for more for a finished piece (and I don't relish thinking about doing any more of these anyway). Note that I've sold a finished copy of this before for over $500...
If you also get my other BSG props (in THIS THREAD) I will let it all go for 625usd!
This key was of course based on photos and measurements from an original. I even copied the slightly wonky milling groove. The clear emitters are 3d printed replicas of the (impossible to buy as they are long OOP) acrylic flashlight rods used on the original, duplicating the "inner core" and the way they carried light. It lights up with a button-cell battery and disassembles into three parts, held together by two allenhead screws. Painted with Alclad Chrome and sealed.
If you want it, please SEND ME A PM! Do not use the buy-it-now button!
If you also get my other BSG props (in THIS THREAD) I will let it all go for 625usd!
This key was of course based on photos and measurements from an original. I even copied the slightly wonky milling groove. The clear emitters are 3d printed replicas of the (impossible to buy as they are long OOP) acrylic flashlight rods used on the original, duplicating the "inner core" and the way they carried light. It lights up with a button-cell battery and disassembles into three parts, held together by two allenhead screws. Painted with Alclad Chrome and sealed.
If you want it, please SEND ME A PM! Do not use the buy-it-now button!
Last edited:
