dstrunc2
-
-
Hi all!. Here's a few pics of the build as it is now, with the countdown to finishing very shortly & into paint!. Latest work has been... -
dstrunc2 reacted to Dazza007's post in the thread YAFF - Yet Another 5 Footer Falcon Build with
Like.
OK the upper mandible port side finished - it is broken into 3 along lines that should be mostly hidden Any parts that sit on the... -
Another thing that can happen to cause this and some other issues (I'll try and keep this short, promise :) ) Most complex parts I...
-
I've had parts of models go missing when trying to split them. Could be the original model wasn't manifold, or maybe not enough vertices...
-
dstrunc2 replied to the thread 3D Printed Millennium Falcon Build.Just some of the fitment issues you can expect to run into if you want to print this thing. The complete model you get when you...
-
-
dstrunc2 reacted to Dazza007's post in the thread YAFF - Yet Another 5 Footer Falcon Build with Love.
Goal this week is to finish off the Mandibles - at least the upper parts, I still have the lower pits to complete. Have a variety of...
-
dstrunc2 reacted to Dazza007's post in the thread YAFF - Yet Another 5 Footer Falcon Build with Like.
Cheers for all the wonderful comments - I have 1 part left to print for the port sidewalls - and 2 of my already printed parts, I will...
-
Sorry for the long delay on updates on this project. Many life things got in the way, and I lost the mojo for this project for a while...
-
dstrunc2 reacted to thibkaji's post in the thread Studio Scale B-Wing Starfighter Build Thread with Like.
Ugh, I stayed up WAY too late tonight, but I was in a groove working on the lower half of the cockpit and wasn’t paying attention to...
-
dstrunc2 replied to the thread 3D Printed Millennium Falcon Build.Some of the more tedious work done this weekend. Had some gaps/holes that needed to be plugged. quick primer coat before sanding. Was...
-
-
And here we have my latest 1/1000 scale model. This design is based on early concept art for STAR TREK: PHASE II, before Matt Jefferies...
-
dstrunc2 reacted to thibkaji's post in the thread Studio Scale B-Wing Starfighter Build Thread with Like.
The vacuum forming machine is now complete! This is very exciting, as now I can finally start to create the shells needed for most of...
-
dstrunc2 replied to the thread 3D Printed Millennium Falcon Build.I think with this particular set of files I could upscale to about 30in before having trouble fitting some parts on the build plate...
-
dstrunc2 replied to the thread YAFF - Yet Another 5 Footer Falcon Build.So how will the decks be attached? Bolted/screwed to the inner circular support with the outside edges being held down by magnets?
-
dstrunc2 replied to the thread 3D Printed Millennium Falcon Build.Yep. That’s the one
-
-
Loading…
-
Loading…
